9000 Series Titan Amplifiers

Titan series DSP power amplifiers and collectors are network appliances that provide signal processing, modular power amplifiers, and supervision testing. The Titan series is designed to move signal processing and power amplifiers to the edge of the network for greater flexibility, higher reliability and lower installation costs. When controlled on the network by an IED announcement controller or DSP node, the Titan series places amplifiers close to speakers and collectors close to sensors to reduce costly cabling.

All IED power amplifier systems are designed with high efficiency Class D operation for low power consumption and reduced cooling demand.

The T9160 is the world’s first networked processing amplifier system. Designed for installation at the network edge, the T9160 provides a network interface, digital signal processing for 16 channels and facilities for 8+1 Titan amplifier cards. All amplifier control, audio supervision, and audio monitoring are provided with a single Ethernet connection.

• Designed to integrate with a networked 510ACS.
• Each channel provides equalization, level control, delay, ambient analysis, monitoring and automatic testing.
• Channel audio is distributed with CobraNet® and IED’s dynamic channel addressing.
• Ninth amplifier card slot accommodates a backup amplifier card for automatic backup amplifier switching.

The T6400 is a two-card amplifier mainframe designed to accept Titan series power amplifier cards.

• The cards may be either single channel 400-watt or dual channel 200-watt units.
• The frame provides analog audio inputs and outputs for monitoring fan speed, temperature and logic status.
• No signal processing is provided in this frame.

Titan Power Amplifier Cards are designed to plug into Titan T9160 and T6400 amplifier mainframes. They provide high power class D efficiency for multi-channel installations requiring high density and long service life. Cards are available in the following configurations.

• T6472 2 x 200-watt Channels, 70 Volt Output
• T6412 2 x 200-watt Channels, 100Volt Output
• T6482 2 x 200-watt Channels, 8Ω Output
• T6471 400-watt Channel, 70 Volt Output
• T6411 400-watt Channel, 100 Volt Output
• T6441 400-watt Channel, 4Ω Output
• T6481 400-watt Channel, 8Ω Output

The T9032NS is an interface unit designed to collect real time noise data from IED 540 ambient noise sensors and deliver that data to the network for use by IED DSP amplifiers. Each collector supports and provides remote power for 32 sensors. The T9032NS is powered from a PoE enabled switch port, mid-span power, or modular power supply.

The T9016RY is a general purpose relay controller providing 16 Form C relay outputs. The T9016RY is powered from a PoE enabled switch port, mid-span power, or modular power supply. This controller is also available in a 32 relay unit (T9032RY)

The T9032LVIO is a 32-channel GPIO controller. It provides assignments in groups of 8 for logic inputs, logic outputs, voltage inputs or voltage outputs. The T9032LVIO is powered from a PoE enabled switch port, mid-span power, or modular power supply. This control is also available in a 64-channel unit (T9064LVIO)

The T9032MT is a 32-input monitor/test point collector. It accepts inputs from analog audio and 596SGFI sensors for connection to local T9160 or T90xDSP. This combination provides automatic testing with reporting and audio monitoring delivered to the network. The T9032MT is powered from a PoE enabled switch port, mid-span power, or modular power supply.